Vanquish VPS08351 Currie Portal F9 Scx10 II Front Axle Kit Silver HIE5_R0ZMK53

Currie F9 Portal Front Axle for SCX10-II based vehicles The F9 Portal axles create extreme amounts of ground clearance under the centre of your axle, increasing the clearance by 1/2+ (13mm). This provides the equivalent of a tyre over 1 inch taller than what is on your vehicle. The advantage of the Vanquish Currie F9 Portals is the gear reduction inside the portal (1.67:1) which can be adjusted with optional gear sets (1.4:1 Overdrive). By adding reduction at the portal, less torque is transferred through the other upstream components in the drivetrain. These axles are a direct replacement to any Axial AR44 axle, using all stock links. These axles come with all parts needed to assemble a full front axle. Features Portal box built into the included knuckle with bolt on high steer arm for double shear mounting Gear reduction in the portal of 1.67:1 (18/30), Optional Overdrive Ratio of 1.4:1 (20/28) recommended for use in front axle only. Included Vanquish AR44 machined gear set Overall axle reduction of 6.26:1 with stock portal ratio 13mm increase in ground clearance Specifically design offset C-hubs is machined into the housing for strength, durability, clearance and scale appearance Hex to hex width of 7.66 inches, only roughly 5mm wider than a stock AR44 axle with a narrow hex Replaceable Chromoly threaded inserts used at knuckle and C-hub to ensure a stripped thread doesnt ruin your investment Brass knuckle bushing from the AR60 axles are used in place of SCX10-II sized for more durability. Chromoly AR60 size VVD axle shafts come preassembled Chromoly stub shafts with 6mm design at the drive pin which tapers down to a 5mm thread for ultimate strength Chromoly spool Aluminium 12mm hex with set screw Compatible with stock SCX10-II Chassis mounted servo or F9 Servo on axle mount Uses all SCX10-II linkage Adjustable steering stop integrated into knuckle Complete Fast Eddy Bearings kit Licenced by Currie EnterprisesPortal box built into the included knuckle with bolt on high steer arm for double shear mounting.
Gear reduction in the portal of 1.67:1 (18/30), Optional Overdrive Ratio of 1.4:1 (20/28) recommended for use in front axle only.
Included Vanquish AR44 machined gear set.
13mm increase in ground clearance.
Specifically design offset C-hubs is machined into the housing for strength, durability, clearance and scale appearance.